Hover Bunk Guide
This page contains the install Guide for the Hover Bunk Bed with Manual and Video.
Important Note: Expand Furniture Inc declines all liability caused by the incorrect assembly of the bed or failure to mount the bed. If you fail to mount the wall bed to the wall or correctly fasten it, we do not take responsibility for this.
Below is a downloadable PDF of the Hover Bunk Guide. You can see our video install also.
We highly recommend you watch the video guide during your install for a step by step visual assembly.
PDF Manual for the Hover Bunk Bed Install
Helpful Notes & Tips for all installs:
- Clear your room as much as possible before you start the install. Unpacking the panels will take some time, longer than many expect, so do this in advance of your install. You will need a power drill, screw driver, wall anchors and a ladder.
- All Hover & MurphySofa are do it yourself assembly and require wall mounts. It is up to you to determine your wall type, make sure it is safe and correctly mount the wall bed to your wall safely and properly. It is best to hit studs if you have drywall and make sure to use the correct wall anchors for your wall type. You can always install extra brackets and anchors for added security and peace of mind. Your local hardware store or your handyman/contractor should be able to advise on this. We suggest using anchors with weight capacity of at least 100lbs each and using 12+ of them for added security. Toggler Snap Toggle Anchors have been a popular choice for Drywall with wood or steel studs. Please do your due diligence for your wall type.
Hover Bunk Bed Guide:
Hover Bunk Bed Video install guide
