Junior Guide – Snap

Thanks for choosing the Junior Giant Table!

ATTENTION: How to unlock the Snap locks Properly. Your Junior Giant uses snap locks to secure the table and extensions.
Opening the compacted console requires a jolt. To unlock extensions lift at the seam between extensions.

Console open: Open from front-side with a hard jolt while holding the other side of the console.

Extension open: Lift the extensions from the middle between the seams to unlock. You can also jolt them open but it’s easier to lift.

Unboxing: Your Junior Giant Console comes already assembled however there are a few steps to unpack this properly.

1. How to open: What you want to do is carefully tilt the carton upside down so you can access the bottom of the carton so you can remove the wood support packing.
2.  Removing the wood support: Open the bottom of the box and you will see a wood board that has been drilled into the bottom of the table. This is done for safe transport. Proceed to remove the screws and the bottom board.
3. Remove the product from the carton: Now that the protective board is removed you can take the product out. We suggest that you tape the bottom of the box back up and rotate it back over. But you can also just remove the product upside down from this position. Do so so careful and we suggest using a blanket if you are going to place it on the ground.
4. Adding in the dowels: See the video below. You add the ‘male dowels’ into the table. These are sometimes taped to the table underside.
   Please note there is also a larger Plastic “snap” dowel for this model.

SNAP dowel insertion:

Metal Dowel insertion:

Guide to inserting the extensions:

 

Opening the Junior Giant: